h4831sc - An Overview

I gave up on it and went to other powder when the new powder was developing extra tension and was slower in comparison to the old things. I don't remember if I even tried using common h4831 or not; I'm contemplating not.

I've made use of H4831 (and H4831SC), and I utilize it. There are not many cartridges that I use it for as I seem generally to gravitate to other powders. Nonetheless, I am unable to express that it would not perform. It is simply that Various other powders work greater for the offered cartridge. For illustration, inside the 280, H4831 gave me superior velocity and very good groups with Nosler a hundred and forty AB. Nonetheless, RL19 was marginally superior in accuracy, while the velocity was almost equivalent.

4gr of H4831sc and Federal 215 primers. I found this combo generates .5MOA groups with velocity about 3020fps outside of a 26" barrel. I use this same powder in my 300wm shooting 180gr pills, so It is awesome to get one powder for both equally.

Operate your load up with the precise powder (sc or normal) and good deal you will be applying however. Similar melt away rate doesn't mean it'll behave "specifically" precisely the same. I've noticed more than 100 fps difference between sc and mil-surp plenty of H4831.

The only real difference as I understand it would be that the SC was intended to operate through powder actions superior (which it does). The lengthier grains will not feed well in any way in certain measures. Thats my 02 :grin:

I've made use of H4831 and H4831SC in my 260 Rem with no variation. The one thing is the quick Minimize provides somewhat more House. Good luck!gun)

i've used both equally and employed the very same expenses and possess not been capable to tell any noticable variations with performance. the SC Edition meters a little smoother is about all. any opinions??

In truth, It really is even a smart idea to back down and operate up properly once you go from a person large amount to another lots of the same powder.

The main reason I switched from IMR 4831 to H4831 was to make use of the temperature insensitivity of a Hodgdon Extraordinary powder.

You could have to help make a handful of more h4831sc load data posts to acquire cleared to perform PM's. As soon as you get to that status I'd publish in the classified reloading section to see if any one is in your area for the trade. Click on to increase...

Despite the similarity in nomenclature, they're fully various powders, with IMR 4831 staying substantially speedier compared to Hodgdon variants. You should not deal with them as a similar powder, as they most absolutely are h4831sc load data not.

Again to previous site Shut If there is anything in the cart, it will not be brought over into the previous site.

Southwest Idaho I tried H4831sc in my 300 WM but h4831sc experienced a lot better speed and accuracy with H1000. I would alternatively use a slower burning powder with 215g drugs.

If I have a pound or two of a powder and acquire much more of the identical, only a special good deal amount, I will mix all of them up to make sure that I've a homogeneous batch of powder with which to work.